i3 International SRX PRO User Manual page 55

Chapter 1. SRX-Pro Server
Tip
A default name is used for all new presets.
The preset(s) can be optionally renamed by
the user.
e. Adjust camera focus by clicking Focus In/Focus Out buttons on the panel.
f. Adjust camera brightness by clicking Iris Close/Iris Open buttons on the panel.
1.3.7.3.2. Saving Presets
To save the configured preset, do the following:
1. In the Advanced Control panel, right-click inside the Presets field
2. Select Create Preset from the context menu
1.3.7.3.3. Renaming Presets
To rename the configured preset(s), do the following:
1. Select the desired preset in the Presets drop-down menu
2. Right-click inside the Presets field
3. Select Rename Preset from the context menu
4. Type the custom preset name in the Presets field. In the example below, Preset 10 will be renamed.
1.3.7.3.4. Deleting Presets
To delete the configured preset(s), do the following:
1. Select the preset in the Presets drop-down menu
2. Right-click inside the Presets field
3. Select Delete from the context menu. In the example below, Preset 10 will be deleted.
51
PTZ mode