Ptz Settings - i3 International SRX PRO User Manual

Chapter 1. SRX-Pro Server
1.4.10.2. Configure System Restart Time
If the system freezes, it will be restarted by the I/O board. If, however the system is running smoothly without freezing,
it can work for months without being restarted. The cache that will accumulate in that period of time will eventually
slow the system down. To avoid this problem, it is advisable to set a weekly restart time for the system. You have an
option of restarting the entire server or just the SRX-Pro Server software.
To configure the restart time, do the following:
1. Check individual day checkboxes to select the day(s) for system restart. Click Select All to restart DVMS daily.
2. Enter the Time (hrs : mins) to restart the system
Note: The time is in 24-hour format.
3. In the Restart Mode, select Software or System, where Software is SRX-Pro Server software and System is the
DVMS. Depending on your selection, SRX-Pro Server software or the entire DVMS will be restarted at the configured
day and time.
4.
Click the Save button to save the configured settings
1.4.10.3. Watermarking
In the Watermark menu:
Enable Watermark option is always enabled and cannot be disabled. This option ensures that the recorded video is
always watermarked.
Check Display Watermark Image to display the word "WATERMARKED" in green font on the watermarked video
recordings during playback. Uncheck to hide "WATERMARKED" message during playback.
Click the Save button to save the configured settings

1.4.10.4. PTZ Settings

This section displays the COM port used for the PTZ camera(s) communications and the default Port Speed (baud
rate).
COM6 is a built-in COM port on the I/O board, which is by default assigned to PTZ camera communications.
87
System Setup