i3 International SRX PRO User Manual page 10

Chapter 1. SRX-Pro Server Setting up SRX-Pro (DVMS models only)
Step 4: Connect the power cable to the power supply on your DVMS.
NOTE: At this point, locate the power switch next to the power plug and make sure it is in the OFF position.
Step 5: VERY IMPORTANT! CONNECT THE POWER CABLE TO A UPS (UNINTERRUPTIBLE POWER
SUPPLY). PLEASE NOTE: AN UNINTERRUPTIBLE POWER SUPPLY (MIN. 500VA) MUST ALWAYS BE
USED; OTHERWISE ALL WARRANTIES WILL BE VOIDED.
Step 6: Turn the power switch in the back of the system to the ON position. The system will then power on automatically.
If this does not happen, press and hold the power switch for 2 seconds. The system will then power up.
NOTE: The power switch is located at the front of your DVMS (toggle button switch)
6