i3 International SRX PRO User Manual page 48

Chapter 1. SRX-Pro Server
1.3.6.1. Indicators in Mux display
The following custom indicators are available in the Mux display:
• PTZ Camera Indicator. PAN/TILT indicator is only shown for the cameras that have been configured as PTZ cam-
eras in Hardware Setup. Note that the PTZ camera will not respond to user command unless it is properly configured.
• Intelli-Zone Indicator. Provided the video channel is configured for the Intelli-Zone™ feature, this indicator will be
displayed next to the PTZ camera indicator.
• Recording Schedule Indicator. This indicator shows what type of recording the channel is configured for in
Schedule Setup.
• Channel #, Name, and IP Address (for IP cameras only). Channel # will remain the same regardless of the location
on the main screen. Channel Name is configured in the Hardware Setup.
• DZ. Digital Zoom indicator signifies that the video can be zoomed into digitally. See Digital Zoom section for more in-
formation.
The following indicators are available:
Continuous Recording
Motion Recording
Sensor Recording
Sensor + Motion Recording
Continuous Recording with Emergency Frame Rate
Video Logix Recording
Continuous + Audio Recording. Activate Audio Input in Hardware Setup for selected channel to record
audio stream together with the video.
Motion + Audio Recording. Activate Audio Input in Hardware Setup for selected channel to record
audio stream together with the video.
Sensor + Audio Recording. Activate Audio Input in Hardware Setup for selected channel to record
audio stream together with the video.
44
Real-time Display vs Mux Display