C H A P T E R 1 2; Using Mark - ETC ION Operation Manual

C h a p t e r 1 2

Using Mark

{Mark} is an instruction that automates the process of presetting moving lights to their required
state in a cue, prior to fading intensity up. This allows your moving lights to unobtrusively perform
non-intensity parameter transitions in an inactive (darkened) state.
Ion provides two different methods to mark lights: AutoMark and Referenced Marks.
This chapter contains the following sections:
•
•
12
Using Mark
AutoMark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
Referenced Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
175