Introduction To Playback; Playback Controls - ETC ION Operation Manual

Introduction to Playback

Cues may be played back using the master playback fader pair. While any cue list can be loaded to
these faders, the first cue list you record to will automatically load to the master fader pair.
The master playback fader pair is located to the left of the control keypad. The master is a split
cross-fader pair. The two buttons beneath the master fader pair are [Go] and [Stop/Back]. The
[Load] button is located directly above the fader pair and the area of the LCD above it corresponds
as well, displaying the current cue and list active on the master fader.
P l a y b a c k C o n t r o l s
.
Load button
Master
fader
pair
210
Fader
control
button
Ion Operations Manual