Create A New Macro From The Display - ETC ION Operation Manual

C r e a t e a N e w M a c r o f r o m t h e D i s p l a y
From the macro editor display, enter any unrecorded macro number from 1 to 1000 and press
[Enter]. Your new macro number will display in the macro list in numerical order but will not have a
label or any contents.
To store the macro contents, select the macro and press {Edit}. A cursor appears flashing in the
macro content detail portion of the display, ready for you to add the macro content.
For Example:
Create macro 3. Write the instruction to set all active channels to 50%, then sneak them to
their original levels over 10 seconds and last, link to macro 5.
•
•
•
•
•
•
While in macro edit mode, all keys are entered as content except the macro editor softkeys, arrow
keys, [Escape], [Select] and [Learn] keys.
268
<Macro> [3] [Enter]
{Edit}
[Group] [5] [At] [5] [Enter]
[Sneak] [Time] [1] [0] [Enter]
[Macro] [5] [Enter]
[Select]
Ion Operations Manual