Table of Contents
Advertisement
Chapter 1
Introduction
This manual will guide you through the operation procedures for your QuickTouch+ Mk2
rigging control system. For installation information, refer to the documentation that shipped
with your QuickTouch+ Mk2 back box or control panel and electronics assemblies.
Document Conventions
This document uses the following conventions to draw your attention to important
information.
Note:
CAUTION:
undefined or unwanted consequences of an action, potential for data loss or
an equipment problem.
WARNING:
occur, people may be harmed, or there are serious or dangerous
consequences of an action.
WARNING:
situations where there is a risk of electric shock.
All ETC documents are available for free download from our website: etcconnect.com.
Please email comments about this manual to: TechComm@etcconnect.com.
Help from ETC Technical Services
If you have questions that are not answered by this document, try the ETC support website at
support.etcconnect.com
resources are sufficient, contact ETC Technical Services directly at one of the offices identified
below. Emergency service is available from all ETC offices outside of normal business hours.
When calling for support, please have the following information handy:
• Product model
• Software version (see
• Other components in your system (number of motors, external E-stop stations, etc.)
Introduction
Notes are helpful hints and information that is supplemental to the main text.
A Caution statement indicates situations where there may be
A Warning statement indicates situations where damage may
RISK OF ELECTRIC SHOCK! This warning statement indicates
or the main ETC website at etcconnect.com. If none of these
Identify the Software Version on the next page
)
1
Advertisement
Table of Contents
