E n c o d e r L C D s c r e e n
The encoder LCD displays the active parameter category loaded on the encoders, as selected by
the page buttons. Each encoder has an associated control section in the LCD that provides visual
indication of:
• The parameter it controls.
• The current setting (value) of the parameter.
For Example:
Encoder
wheel 1
The above graphic shows the encoder LCD displaying the focus parameters for a moving
light.
•
Encoder 1 is controlling pan.
•
Encoder 2 is controlling tilt.
•
Encoder 3 is controlling position MSpeed.
•
Encoder 4 is not assigned.
Pressing a different encoder page key loads the encoders with other parameters of that type (if
available).
8
Basic Manual Control
Encoder
wheel 2
Encoder
wheel 3
Encoder
wheel 4
113