Editing Palettes In List View - ETC ION Operation Manual

E d i t i n g P a l e t t e s i n L i s t V i e w
When you press the specific Intensity, Focus, Color or Beam palette button twice, a list view for the
associated palette type is opened on a new tab (or brings the list view into focus if already open).
You can also open the list view from the browser.
From the list view, you can select a palette for editing, which changes focus to blind channel view,
with the specified palette ready for editing. In addition, you can add palettes to your listing and edit
the labels for each palette in the list.
For Example:
In the list view, you can select palettes and relabel or move them.
•
While in the specific palette category list view, the {Move To} and {Edit} softkeys are available for
use.
To move a specific palette to a different location:
• [1] {Move To} [3] [Enter] - moves the contents and label of the specific palette 1 to palette 3.
If palette 3 is already used, you will be asked to confirm that you want to overwrite the existing
recorded palette. You can also hit [Copy To] [Copy To] to access {Move To}.
You can also move data from a preset to a palette and vice versa. It is important to remember that
when using the {Move To} command that data is removed from its current location and moved to its
new location.
To copy a specific palette to a new palette:
• [2] [Copy To] [5] [Enter] - copies the contents of palette 2 to the new palette 5.
You can also use [Copy To] from presets to palettes.
To edit any palette data from the List View:
• [1] [5] {Edit} [Enter] - selects palette number 15 and brings the blind display into focus, with
palette 15 selected for editing. You can use the [Next] and [Last] buttons to access the other
palettes, or select a new palette for editing from the keypad.
146
[1] [5] [Label] <name> [Enter]
See "Using the Browser" on page 29.
Ion Operations Manual