Introduction; Compatible Products - ETC F-Drive W1 Series Instruction Manual

Introduction

The F-Drive Series W1 Driver LED power control solution provides a centralized approach for
controlling LED luminaires. It is a wall-mount driver that provides power and data for up to
four circuits in standard and emergency installations. By maintaining remote, easy access to
the driver, LED-based systems can be easily installed and serviced, while ensuring critical
components are readily accessible to support staff.

Compatible Products

W1 Drivers are compatible with the following luminaires:
Model
W1 CC Driver
FDW1CCD
W1 CC Emergency Driver
FDW1ECCD
W1 Fade to Warm Driver
FDW1FTWD
W1 Fade to Warm
Emergency Driver
FDW1EFTWD
W1 Chroma Driver
FDW1CHD
W1 CV Driver
Constant Voltage
FDW1CVD
W1 CV Emergency Driver
Constant Voltage
FDW1ECVD
For more information on compatible products and breakout boxes, see
Compatibility Database on the next page
next page .
Note:
luminaires.
Introduction
Compatible Luminaires
• ETC Navis 100 Fixed White
• ETC Source Four Mini LED for F-Drive
• ETC Irideon FPZ and WLZ for F-Drive
• ETC ArcSystem Pro One-Cell Standard, Pro One-
Cell Small, and Pro One-Cell Micro
• Third-party 200–700 mA constant current
fixtures
• ETC Navis 100 Fixed White
• ETC Navis 100 Fade to Warm
• ETC Navis 100 RGBW
• Third-party 24 VDC constant voltage fixtures
F-Drive W1 Drivers do not support ArcSystem Pro One-Cell High Output
and Documentation for Compatible Products on the
Recommended
Breakout Box
• None for
daisy-chain
• B-Box4R for
star topology
• B-Box4M
• B-Box4T
• None for
daisy-chain
• B-Box4R for
star topology
• None for
daisy-chain
• B-Box4R for
star topology
• None for
daisy-chain
• B-Box4R for
star topology
• B-Box4T
LED Dimming
1