Record Filters - ETC ION Operation Manual

Record Filters

Record filters are used to select specific parameter data to store to record targets. When no filters
are selected, all parameters can be stored, as appropriate to the [Record], [Record Only] and
selective record action used.
N o t e :
Record filters are applied from the CIA using the following buttons:
CIA - parameter
buttons
The parameter category buttons can be used to select filters, as follows:
• Intensity (enables recording intensity data)
• Focus (enables recording pan and tilt)
• Color (enables recording color data)
• Beam (enables recording all beam data)
184
When storing show data, applied filters are highlighted and allow the associated
parameters to be stored in record targets.
When filters are deselected (not highlighted), they prohibit storing the associated
parameters.
There is no difference between having all filters selected and having no filters
selected (default). In either state, all parameters are available for recording.
Filter button
Parameter category
buttons
Ion Operations Manual