Using The Cue List Index; Open The Cue List Index - ETC ION Operation Manual

Using the Cue List Index

The cue list index is a blind display list which shows the cue list you are working with, the cue status,
any other stored cue lists and what (if any) faders the lists are loaded onto. All cue attributes can be
edited from the list including whether the cue list is set to independent or not, and if the intensity
values in the cue list will play back as HTP or LTP. While cue attributes can be changed in live or
blind, independent and HTP/LTP settings can only be set in the cue list index.
O p e n t h e C u e L i s t I n d e x
You can access the cue list index by pressing [Cue] [Cue], or you can navigate within the browser
to Record Target Lists > Cue List Index and press [Select].
Stored
cue lists
Selected
cue list
The top half of the cue list index displays all stored cues, including cue attributes, for the selected
cue list. The bottom half of the cue list index displays all stored cue lists. The selected cue list is
highlighted.
Using the mouse, you can move the barrier between the stored cue display (top) and the stored list
display (bottom) to increase or decrease the viewing area of either section. Hover the mouse arrow
over the list boundary until it changes to the familiar "move boundary" icon. Then click and drag the
boundary up or down to the desired height.
192
Cues in
selected list
List boundary
(to move up or down,
hover mouse here)
Ion Operations Manual