Lamp Controls - ETC ION Operation Manual

Lamp Controls

Lamp controls allow you to execute control functions of selected fixtures such as calibrate, douse
lamp, strike lamp, and reset. Each fixture type has its own set of lamp control options which are
available to you when you select the fixture from live and press the {Lamp Cntrls} softkey. This
information is also available using [About] (see
For Example:
•
-or-
•
This screen displays any lamp controls associated with the selected channel (this is also the "Lamp
Control" subscreen of About). If the channel is a conventional (intensity-only) fixture, no parameters
will be displayed. When the selected channel is an automated luminaire, options specific to the
fixture type will display for use.
Exit the lamp controls display by pressing [Displays].
8
Basic Manual Control
[1] [1] [Enter] {Lamp Cntrls}
[1] [1] [Enter] [About] {Lamp Cntrls}
Using About, page 245).
Pressing any of these parameter control
buttons will affect the selected channel
immediately.
121