Storing Presets Using [Record Only] - ETC ION Operation Manual

S t o r i n g P r e s e t s u s i n g [ R e c o r d O n l y ]
[Record Only] is a selective record process that stores only manual parameter data. Therefore,
when used to record presets, only manual data for channels will be stored in the preset. As with
[Record], filters and {Make Null} can be used to further modify what information is stored.
"Storing Data with Record Filters" on page 186.
The following methods can be used to store presets using [Record Only]:
• [Record Only] [Preset] [5] [Label] [name] [Enter] - records manual parameter data for all
channels and adds a label to preset 5.
• [Record Only] [Preset] [Next] [Enter] - records manual data to the next sequential preset
number.
• [-] [3] [Record Only] [Preset] [n] [Enter] - stores the preset, withholding the group or
channels specified.
• [Channel list] [Record Only] [Preset] [6] [Enter] - stores the preset, but only the manual
data for the channel list supplied.
• [Channel list] {Color} [Record Only] [Preset] [7] [Enter] - stores only manual color data for
the specified channels to the preset.
9
Storing and Using Presets
See
131