ETC ION Operation Manual page 194

M a r k S ym b o l s
The symbols that appear in the Mark flag include:
• D. . . . . . . . . . . . . . . . . . .AutoMark is disabled.
• R. . . . . . . . . . . . . . . . . . .Indicates a manual reference override. Manual changes have
• M . . . . . . . . . . . . . . . . . .Indicates a mark is placed, but manual, and must be stored.
• + . . . . . . . . . . . . . . . . . . .Indicates a cue is both a marking and reference cue when
• - . . . . . . . . . . . . . . . . . . .Indicates a dark move, a cue that has any non-intensity
• x . . . . . . . . . . . . . . . . Indicates that a mark has been placed, but the mark has been
180
been made that override a previously stored reference (such
as to a palette or preset). Once recorded, the reference will
be broken. If updated, the referenced target will be updated
as well, unless otherwise instructed.
Is blue when stored."m" indicates cue is not marking.
displayed in the mark flag.
parameters moving on channels whose intensity is at 0.
broken. If possible, Ion will automark the lights.
Ion Operations Manual