Using Direct Selects - ETC ION Operation Manual

U s i n g D i r e c t S e l e c t s
Direct selects allow access to a number of controls, including a channel select display. If there are
more items than can be viewed at once, you may view subsequent pages by using the page buttons
({Page }, {Page
S e l e c t i n g C h a n n e l s w i t h D i r e c t S e l e c t s
Channel direct selects are highlighted when selected. Channel selection is generally an additive
process, if channels 1-5 are selected, pressing {Channel 6} adds channel 6 to the selection,
leaving channels 1-5 also selected. Pressing {Channel 6} again will deselect the channel.
If you have labeled channels in patch, those labels will be displayed above the channel number
when viewing channels in the direct selects.
It is possible to double hit a channel button. This selects that channel and deselects any previously
selected channels.
• {Channel 1} - adds channel 1 to currently selected channels, if not currently selected.
• {Channel 1} {Channel 10} - adds channels 1 and 10 to currently selected channels.
• {Channel 1} {Channel 1} - selects channel 1, deselects all other channels.
• {Page
• {Page
3
System Basics
}) by the direct selects.
} - pages direct selects down by one page.
} - pages direct selects up by one page.
31