Introduction
The Power Load Controller is a wireless lighting controller for electronic ballasts and LED
drivers. It also provides a motor load specification to deliver process control for circuit or
fan/curtain control applications, eliminating long wire runs. With the ELEDR or ELEDRH, high-
voltage model, you can integrate lighting and automation control into one distributed wireless
device.
Echoflex systems communicate by radio frequency in a point-
to-point network and conform to an open standard. Echoflex
controllers include functionality to allow the presetting of
lighting scenes based on values for intensity and color
temperature. Presets can be activated from scene stations,
time clocks, or gateways. The lockout feature allows time
clocks to schedule a controller's response to specific sensors
or stations.
This guides describes the features of the Echoflex Power Load
Controller models and how to use and configure them.
Features
Single relay control output, 20 A at 120-277 VAC and 16 A at 347 VAC
•
Motor load rating: 1.5 hp at 120 V and 3 hp at 277 VAC
•
Occupancy control with auto ON/OFF, or vacancy control with manual ON, auto OFF
•
Use with wireless battery-free wall switches, photo sensors, occupancy sensors, and
•
gateways
Integrated daylight harvesting control with Photo Inhibit feature
•
Range Confirmation allows optimal placement of linked sensors
•
Pre-commissioning available when sold as a system through Echoflex
•
Central command support for Building Energy Management Systems (BEMS) gateway
•
control
Easy installation on electrical junction boxes with 1/2 in mounting nipple
•
Doubles as a message repeater
•
Energy cod compliance including demand response, Partial-ON and Partial-OFF control
•
Note:
that provide complete system solutions (linked and configured), contact Echoflex.
Garibaldi Pro software is available for download from the Echoflex website at
echoflexsolutions.com.
Introduction
For information about Garibaldi Pro software or pre-commissioning services
High voltage
model shown
1