Start Up - ETC ION Operation Manual

F r o n t P a n e l
20 user-
configurable
buttons
(default shown)
• The soft power switch activates the RPU (check rear panel to ensure power is connected and
hard power switch is on).
• Backlit indicators identify the operating status (master, backup, client, and so on) of the unit.
• USB port is provided for easy show loading to or from a USB storage device.
• 20 buttons are configurable from the Eos Configuration Utility (ECU). They are set to a default
configuration. The label strips for these buttons are removable and reversible. Any changes
to the button configuration can be written on the opposite side in pencil.

Start Up

After connecting power to the unit, press the soft power button on the front of the console.
By default, the RPU will boot into the Ion environment as a primary. If you wish to designate your
RPU as something other than a primary, you must exit the Ion environment and choose a different
designation from the Eos Configuration Utility welcome screen.
For more information on multi-console terms such as primary or backup, please see
and Synchronized Backup, page
316
307.
Backlit
indicators
USB port
Ion Operations Manual
Soft power
switch
Multi-console