Basic Use Guidelines; Net3 Services - ETC ION Operation Manual

Basic Use Guidelines

D i s p l a y s
The RPU can be used with either one or two DVI monitors. You can collapse or expand the CIA on
the displays by engaging the scroll lock and pressing F5. If you are using one monitor, you may find
this feature useful in increasing the efficiency of your available display area.
N e t 3 S e r v i c e s
By default, both Ion and the Ion RPU ship with all Net3 services enabled.
When used in a multi-console backup system, you must disabled Net3 services for the intended
backup device. If the RPU is the intended primary (recommended, see Backup Scenarios, page
313), some Net3 services must be disabled on the intended backup device (console or RPU).
You must disable the DHCP server and TFTP server. You must also change the SNTP server to
"client" to enable time synchronization between Ion devices. All of this is done using the Eos
Configuration Utility (See Net3 Settings, page 300 and Ion IP Settings, page 301).
318 Ion Operations Manual