Custom Configuration; Specifications - ETC Echoflex Elaho Installation Manual

Echoflex Solutions Installation Guide
0–10V Controller–Gen 2
Custom Configuration
This document guides you through the installation and local
configuration of the 0–10V Controller–Gen 2. You can access advanced
functionality using the ElahoAccess Mobile App. For more information,
see the ElahoAccess integrated help system.
E choConnect
EchoConnect is a two-wire topology free system that provides the 0–10V
Controller–Gen 2 with the flexibility to connect in a system with up to
16 Elaho control products and up to 15 other Elaho output products over
500 m (1,640 ft) of control wire.
Plug-and-Play Functionality
Using the 0–10V Controller–Gen 2 on the EchoConnect control system
allows simple plug-and-play functionality, where no software or external
programming is required. The connected control stations or sensors
provide the control message and the 0–10V Controller–Gen 2 responds.
See the Elaho Inspire Station Installation Guide , Elaho
Occupancy/Vacancy Sensor Installation Guide , or Elaho Light Sensor
Installation Guide for more information about how to set levels and
controls. You can download Echoflex Solutions manuals free of charge
from the Echoflex Solutions website (see page 1).

Specifications

For use with Elaho Control Systems.
Ambient Environment
For indoor use only. Rated for plenum use.
32°F–104°F (0°C–40°C) operating temperatures in 5–95% non-
•
condensing humidity
Electrical Specification
Single Zone model supports:
Power input 120–277 VAC, 60 Hz
•
Load rating:
•
20 A general purpose, tungsten, or resistive
-
16 A electronic ballast
-
Control for 0–10 V fluorescent ballast or LED driver control, able to
•
sink 100 mA
0–10V Controller–Gen 2 Page 2 of 12 Echoflex Solutions