Setting Multipart Cue Attributes; Assigning Cue Attributes - ETC ION Operation Manual

S e t t i n g M u l t i p a r t C u e A t t r i b u t e s
Cue attributes, such as [Time], [Delay], [Block], [Assert], [Label], [Rate], [Mark], and
{AutoMark Off} can be assigned in part cues. They are stored and function exactly as they do in
single part cues.
Cue part attributes can be defined as the parts are recorded, or they can be added after the part has
been created. For example:
• [Record] [Cue] [2] [Part] [1] [Delay] [8] [Enter]
• [Cue] [4] [Part] [3] {Color} [Time] [6] [Enter]
• [Cue] [8] [Part] [9] {AutoMark Off} [Enter]
• [Record Only] [Cue] [5] [Part] [2] [Assert] [Enter]
For more on cue attributes, see
16
Multipart Cues
Assigning Cue Attributes, page 159.
205