Frequency Bands; Frequency Search; Band Search - GME GA9800 Instruction Manual

If Auto is selected the receiver will automatically select the appropriate default
Frequency Step for each band.
The scanner supports the following Frequency Bands:
Frequency Band
150 kHz to 495 kHz
504 kHz to 1.620 MHz
1.625 MHz to 29.995 MHz
30 MHz to 87.975 MHz
88 MHz to 107.950 MHz
108 MHz to 135.975 MHz
136 MHz to 255.100 MHz
255.1125 MHz to 382.100 MHz
382.125 MHz to 769.800 MHz
769.8125MHz to 960.100 MHz
960.125 MHz to 1309.975 MHz

Band Search

Use the Search function to locate active frequencies in one or more bands
1. Press the E/VFO key to select VFO Mode. (Note: the receiver automatically selects
the VFO Mode when it is turned on).
2. Press the BAND key to select the required Band. There are 10 factory preset
bands to choose from (see Frequency Band Table).
3. Set the Squelch level using the Squelch
just disappears.
R X 1 300

FREQUENCy BANDS

Startup Frequency
1.5 MHz
5 MHz
51 MHz
88 MHz
118 MHz
150 MHz
370 MHz
430 MHz
850 MHz
1295 MHz

FREQUENCy SEARCh

IN S T RU C T IO N MA NUA L
Default Mode
AM
AM
AM
FM
WFM
AM
FM
FM
FM
FM
FM
or keys so that the noise
Default Step
5 kHz
5 kHz
5 kHz
25 kHz
100 kHz
25 kHz
25 kHz
12.5 kHz
25 kHz
12.5 kHz
25 kHz
PAGE 11