GME GA9800 Instruction Manual page 118

4 channel amplifier
Hide thumbs Also See for GA9800:
Table of Contents

Advertisement

eLeCTRICAL
General
Complies with: A S4367 and
Frequency Range: 26.965 - 27.980 Mhz
Channel Set: Australian 27 Mhz Marine
Modulation: AM (A3E)
Supply Voltage: • 12.6 V DC nominal
Frequency Error: < 50 ppm over
Dual Watch: M onitor Time - 250 ms
Scan Rate: 5 channels/second
Transmitter
Modulation Frequency
Response: 300 hz to 3 khz, + 1 - 3 db
Max Modulation Depth: 100%
Carrier Output Power: 4 watts Max
Microphone Level @1 kHz
for 60% Modulation: 1 Pa
Spurious Emissions: < - 26 dbm
Receiver
Demodulated Frequency
Response: 300 hz to 3 khz, + 1 - 3 db
Receive Sensitivity for
12 dB SINAD @ 30%
Modulation: - 110 dbm
Max Squelch: < - 80 dbm
Adjacent Channel
Sensitivity: ≥ 55 db
Spurious Response
Immunity: ≥ 55 db
Conducted Spurous
Radiation: - 57 dbm
Specifications are typical unless otherwise indicated and may be subject to change without notice or obligation.
pAgE 10
SPeCIFICATIONS
AS/NZS4355 (Australia only)
A ustralian 27 Mhz
Citizens band
• 10.8 – 15.2 V DC range
temperature range
Monitor period - 2 seconds
IN STRUCT ION MANUAl
Audio Output Power
8 Ohms: 2.5 Watts
MeChANICAL
Dimensions: 65 (h) x 167 (D) x 55 (W) mm
Weight: 450 grams
eNVIRONMeNTAL
Temperature Range: - 10°C to + 60°C
Ingress Protection Rating: IP55 Refer: www.gme.net.au/
The gX300 will operate over the 26 - 30 Mhz frequency
range. For information specific to frequencies outside of
the Australian Marine or Cb bands, please refer to the
appropriate amendment, or contact gME at
export@gme.net.au
IpRatings/IpRatings.html
gX 300

Advertisement

Table of Contents
loading

Table of Contents