Basic Operation; Controls And Functions - GME GA9800 Instruction Manual

To charge the battery:
1. Plug the charger into a standard 240 Volt AC outlet.
2. Plug the lead from the charger into the charging socket on the bottom right of the battery pack.
Note: Continuously trickle charging a fully charged battery may eventually reduce the overall
battery life. To ensure maximum battery life we recommend disconnecting the charger once the
battery has reached full charge.
For further information on charging your battery and tips on conserving battery power,
see section on 'Maintaining Your Battery Pack' later in this manual.
Optional Rapid Charger
If you need to recharge your battery pack much sooner, the optional BCD001 rapid charger can
recharge the battery pack is around 1 hour. For more details, refer to 'Optional Accessories" later
in this manual.

Controls and Functions

Volume Control
Push-To-Talk Key
Monitor Key
Channel UP Key
Channel DOWN Key
FUNCTION Key
Call Key
F - KeyLock
Quiet Key
F - Hi/Lo Power Key
TX6200
DO NOT CONNECT YOUR VEHICLE'S
BATTERY (13.8 VOLTS) DIRECTLY TO THE
CHARGING SOCKET AS DAMAGE TO THE
RADIO AND BATTERY PACK WILL RESULT
WHICH WILL VOID THE WARRANTY.
F
CALL QUIET SCAN PRI
HI/LO OG/GS DUP
User Instructions

BASIC OPERATION

Antenna
Speaker
Microphone
External Speaker / Mic
Connection
Liquid Crystal Display
Priority Key
F - Duplex Key
Scan Key
F - Open/Group Scan
Battery Charging Socket
Key
Page 7