Squelch Settings; Roger Beep - GME GA9800 Instruction Manual

• I f you wish to talk on the busy channel, press the
switch while the radio is locked onto that channel then talk
in the usual way.
• I f you wish to talk on the selected channel, press the
switch while no signals are being received. The radio will
switch to the selected channel.

5. Squelch Settings

The 'Squelch' mode lets you adjust the receiving sensitivity. The
higher the Squelch level is set, the stronger the signal needs to
be for it to be received by the radio.
To set the 'Squelch' mode
MODE
1. Press the
setting mode. The '
2. Press the
(lowest) to 03 (highest) setting.
MODE
3. Press the
store your Squelch mode selection.
6. Roger Beep Tone Selection
The Roger Beep is a tone which is automatically transmitted
whenever the PTT switch is released. This tone alerts the
receiving party that your transmission has ended.
To enable or disable the Roger Beep tone
From the 'Standby' mode:
MODE
1. Press the
setting mode. 'Rb' will be displayed along with a flashing
2. Press the
as desired.
MODE
3. Press the
store your selection. If the Roger Beep function is on, the
icon will remain steady on the display.
TX670
key FIVE (5) times to select the Squelch
' icon will flash on the display.
or keys to select the Squelch level from 01
PTT
or key momentarily to confirm and
key SIX (6) times to select the Roger Beep
or keys to set the beep to '
PTT
or key momentarily to confirm and
Instruction Manual
PTT
PTT
On oF
' or ' '
Page 15
.