Scan/Memory Key - GME GA9800 Instruction Manual

CTCSS
To activate or deactivate CTCSS, the current channel must have
a CTCSS code selected via the
settings for more details).

SCAN/memory Key

The SCAN key is a dual function key that controls both Scan
and Memory Functions.
Scanning Function
Channel Scanning allows you to monitor channels that have
been included in the active scan list. The active scan list
includes all channels which display the icon 'M' on the LCD.
To enable channel scanning, briefly press the SCAn key. 'SCAN'
will be displayed and the radio will show rapidly changing
channel numbers as it scans through the channels. While
scanning, briefly press the
scan direction.
To exit the Scan mode, briefly press the SCAn key again.
The TX670 will return to normal operation and 'SCAN' will
disappear from the display.
Scanning Features
• I f a signal is received, the scan is paused, allowing you
to transmit and receive on that channel. The radio will
automatically resume scanning a few seconds after the last
reception or transmission.
• P ress the PTT switch while the unit is scanning to jump to
the home channel (the home channel is the channel the
radio was on at the time scanning was activated). You can
then transmit and receive on that channel. The radio will
automatically resume scanning a few seconds after the last
reception or transmission.
• W hen the unit has stopped on a busy channel, press the
keys to 'skip' over the busy channel and continue scanning.
TIP: The Scan mode will reduce the overall battery life
because the Standby (battery saver) feature is overridden.
Page 10
MODE
or keys to select the
Instruction Manual
MODE
key, (see key
or
TX670