GME GA9800 Instruction Manual page 338

MeNU FUNCTIONS
Display
'Flashing'
CTC
Po
dh
Uo
rb
bP
bb
CA
VOLUMe LeVeL
There are 7 volume levels to suit your personal preference. To adjust the volume
level, press the or button. 'UL' with be displayed along with a volume level
setting between 1 and 7. A beep tone will also indicate an increase or decrease
in volume.
Note: The volume level cannot be adjusted when Scan or Dual Watch modes
are selected.
ChANNeLS
This radio communicates on 38 of the available 40 UHF CB channels (channels 22
and 23 are reserved for telemetry use and are disabled for voice transmissions).
To communicate with other UHF CB radios, all units must be switched to the
same channel.
To change the radio channel
Press the MODe button. The channel number will flash. Use the or buttons
to select the desired channel. Press the pTT button or wait for 5 seconds to store
your choice.
TX6 5 0
Functions
Change Channel
Change Privacy Code
Set TX Power
Select Dual Watch Mode
Select Hands Free (VOX)
Activate Rodger Beep
Activate Key Beep
Activate Room Monitor
Change Call Tone
IN STRUCT ION MA NUA L
Settings
01 ‑ 40
01 ‑ 38, oF
Lo, HI
01 ‑ 40, oF
Lo, HI, oF
on / oF
on / oF
on / oF
01 ‑ 03
PAGE 9