Selecting The Required Ctcss Tone - GME GA9800 Instruction Manual

SELECTING THE REQUIRED CTCSS TONE

To select the required CTCSS tone on your radio, use the following procedure:
1. Press and hold the F key for about 1.5 seconds. The radio will enter the Menu mode.
2. Now press the F key once to enter the CTCSS setting mode. CTC will be displayed along
with a number from 01 to 50 (if CTCSS is turned off it will display oF). The factory default
setting is oF.
3. Press the or
adjacent CTCSS Tone Frequency Chart. To disable CTCSS operation, set the number to oF.
4. Press and hold the F key for a few seconds to store the selected CTCSS tone and exit the
Menu mode
TX6200
keys to change the number to match the required CTCSS tone in the
User Instructions
CTCSS is turned Off
CTCSS tone
42 selected
Page 29