GME GA9800 Instruction Manual page 137

The following features have been added to your radio since the original instruction manual was printed.
Adjusting the Beep tone LeveL
The beep tones on your TX3100 are designed to provide audible
feedback whenever a key is pressed. If the beep tone level is too
loud or too soft for your operating environment you can adjust
it as follows;
1. Turn the TX3100 OFF.
2. Hold either the or
3. A number will flash on the display to indicate the current
beep tone level setting.
4. Within 3 seconds, press the
decrease the beep tone level. The maximum level is 9 and the
minimum audible level is 1. To turn the beep tone off set the
level to 0.
5. To return the radio to normal operation, press any other key
or simply wait 3 seconds.
TX3100 InsTrucTIon Manual addenduM
key while turning the radio ON.
or keys to increase or
skipping over Busy ChAnneLs WhiLe sCAnning
When scanning, if the radio pauses on a busy channel and you
don't wish to listen to the conversation briefly press either of the
or keys. The radio will skip over that channel and resume
scanning from the next channel in the sequence.
Part No.: 310473 Drawing No.: 44818-1