Batteries And Charging; Controls - GME GA9800 Instruction Manual

FITTING The BATTeRIeS
The TX650 uses an internal Lithium Ion battery which has been pre‑installed.
For removal or replacement please contact your local Dealer. Unauthorised
attempts to remove or replace the battery will void your warranty and may
damage your radio.
ChARGeR INSTALLATION
Connect the power adaptor to the mains power supply and connect the adaptor's
power plug to the charger cradle. The LED's will not be lit.
BATTeRY ChARGING
Insert your radios in the charging compartment until they click into place.
The charger LED's will light RED and the radios will start charging. If the LEDs
do not light RED or they blink in RED and GREEN, remove and refit the radios
into the cradle again until the LEDs light RED.
The charging time for a fully discharged battery is typically 12 to 15 hours.
When the battery is fully charged the charger LED's will light green.
PAGE 4

BATTeRIeS AND ChARGING

CONTROLS

INSTRUCT ION MA NUA L
LEDs
Power Adaptor
• Input: 240 V AC
• Output: 9 V DC
Charging Cradle
T X 650