Selcall Ident Names; The Quiet Mode; Selcall Memories - GME GA9800 Instruction Manual

SELCALL IDENT NAMES

The TX6200 allows you to add a 5 character name to all 10 Selcall Idents stored in memory.
The name can then be stored in memory with the Ident making it easier to identify whose Ident
you are recalling from the memory. In addition, if an incoming Selcall matches one of the Idents
stored in the memory, its name can be displayed to make it easier for you to identify the caller.
THE QUIET MODE (Q)
Your TX6200 can be set to listen on a busy channel but not allow any sound to be heard
UNLESS it receives its own Selcall Ident. In this way, your radio can monitor a busy channel
without disturbing you, but still let you know when you are being called.
When a signal containing your Selcall Ident is received, the QUIET mode is deactivated and an
alarm sounds to alert you to the call. You can then converse normally on the channel.
Note: The QUIET mode overrides the normal Squelch system to ensure that the radio remains
quiet even when the channel is busy. When QUIET is set, you may see the 'BUSY' icon and
signal strengths appear on the display indicating the channel is being used. However, unless
someone transmits your Selcall Ident, nothing will be heard in the speaker.
The QUIET mode can be set to work on specific channels i.e. some channels can be set to
remain Quiet while others can remain Open to all incoming signals.
TIP: Setting the QUIET mode is not mandatory. You can still use Selcall on any channel whether
the QUIET mode is set or not.

SELCALL MEMORIES

Your TX6200 is fitted with 10 Selcall Ident memories which can be used to store frequently used
Selcall Idents. There is also an additional 'CALL' memory which holds the Ident you last sent or
received. The memories can be viewed by briefly pressing the CALL key. The initial memory
displayed is the 'CALL' memory. Pressing the or channel selection keys will step through
the other 10 Selcall storage memories in sequence.
Page 18 User Instructions TX6200