GME GA9800 Instruction Manual page 166

58 mm
31 mm
the mounting bracket can be oriented with the arms extending
either forward or backwards to adjust the position of the front
panel with reference to the mounting point.
Fitting the Radio
Fit radio into cradle and tighten gimbal knobs.
label
once the orientation of your radio is confirmed, you can fit the
GmE model label. simply remove the backing tape and press into
the recess on the front panel.
PA G E 1 7
Fitting the Microphone
the microphone uses an 8 pin plug and socket.
to fit the microphone:
1. Position the microphone plug so the plastic tab faces
downwards, and press the plug into the socket until it 'clicks'.
2. Gently slide the rubber boat towards the hole surrounding the
socket until it is flush with the front panel.
Removing the Microphone
1. slide the rubber boat back along the microphone cord.
2. squeeze the plastic tab on the microphone plug towards the
plug to unlock it while gently pulling the plug outwards. if the
plug does not come out easily, the tab has not released correctly
and should be squeezed again.
cable
i n s t r u c t i o n m A n u A l
Plastic tab
screwdriver
locking lever
move to left to
release Plug
cable entry hole
t X 3 3 4 0