GME GA9800 Instruction Manual page 310

Receiving Signals in the QUIET Mode
• If a normal signal is received on a QUIET channel, the channel will appear busy (the 'BUSY'
indicator will be visible) but no sound will be heard from the speaker. This means you will not
be disturbed by the signal.
• If a normal signal is received on an Open channel (one that is not tagged with "Q") the signal
will be heard in the usual way.
• If a signal containing your Selcall Ident is received on any channel - Open or QUIET - the
QUIET mode will be cancelled and the alarm will beep to alert you to the call. In addition,
the callers Ident or ALPHA name will be displayed. All channels will now be open for normal
transmission and reception.
SCANNING IN THE QUIET MODE
The TX6200 will allow you to scan while the QUIET mode is active. Using this feature you can
monitor a group of Quiet channels or a combination of Quiet and Open channels.
To Scan in the QUIET Mode:
1. Briefly press the F key followed immediately by the OS/GS key to select the required
Scan group.
2. Select the channels you wish to scan and store them in the Scan memory.
3. From those channels, select the ones you wish to remain Quiet and tag each one for QUIET
operation.
4. Press the SCAN key. The radio will begin scanning and 'SCAN' will be displayed.
5. Now, briefly press the QUIET key to activate the QUIET Mode. The radio will then be
scanning in the QUIET mode.
TX6200 User Instructions Page 25