Menu Functions - GME GA9800 Instruction Manual

The TX6200 menu feature provides a convenient method of customising some of the radio's
functions. The follow parameters can be accessed:
CB Channels
• Squelch Sensitivity Settings
• CTCSS Activation and Tone Frequencies
• S-Meter Display Function
Important: Before accessing the Menu functions, ensure the radio is not in Scan or Call modes.
On normal CB channels, the Menu options are accessed in the following sequence:
Squelch Sensitivity -> CTCSS Tones -> S-Meter Display -> Exit
On 'Receive Only' channels, the sequence is:
Frequency Edit -> Squelch Sensitivity -> CTCSS Tones -> S-Meter Display -> Exit
To access the Menu functions
• Press and HOLD the F key until the radio beeps. The Menu mode will be selected and
the first Menu option will be displayed.
• Press the
• Briefly press the F key again to cycle to the next Menu option.
• Pressing the F key again on the last Menu option will exit the Menu mode.
To exit the menu at any point, press and hold the F key until the radio beeps or simply
wait 10 seconds and the menu will time out.
NOTE: When you change the settings within a Menu option, the new setting becomes
available immediately.
Page 32
or key to change the setting of the selected option.
Receive only channels
• Frequency Display and Edit
• Squelch Sensitivity Settings
• CTCSS Activation and Tone Frequencies
• S-Meter Display Function
User Instructions

MENU FUNCTIONS

TX6200