GME GA9800 Instruction Manual page 295

PRIORITY CHANNEL
The Priority channel feature allows you to store one of the 40 CB or 'receive-only' channels in
the TX6200 as a priority channel that can be instantly recalled at the press of a key. This can
be used to provide instant access to your working channel, your local repeater channel or your
favorite 'receive-only' channel.
To store the Priority channel:
1. Select the required channel.
2. Press and hold the PRI key. The channel number will flash for a moment then a high beep
will be heard as the selected channel is stored.
To recall the Priority channel:
1. Briefly press the PRI key. The TX6200 will immediately switch to the Priority channel
accompanied by a high beep.
SIGNAL STRENGTH METER
The TX6200 has a digital signal strength meter that is displayed on the LCD. When in the
normal receive mode (scan not selected) the received signal strength is displayed as numbers
from 0 to 9+ (with 9+ being the strongest) on the lower right of the display.
Note: The signal strength meter can be deactivated or set to display other options. For more
details, see the Menu Functions section later in this manual.
KEYLOCK FEATURE
The key locks the keys to prevent unintentional key presses from altering your TX6200's
settings. While the keys are locked, only the Push-To-Talk switch, on/off Volume control,
Keylock key and Monitor key will continue to function.
To lock the keys, briefly press the F key then press and hold the
heard. The symbol will appear on the display.
To unlock the keys and restore them to normal operation, briefly press the F key then press and
hold the key until a low beep is heard. The
Page 10
symbol will disappear from the display.
User Instructions
Signal Meter
key until a high beep is
TX6200