GME GA9800 Instruction Manual page 341

4 channel amplifier
Hide thumbs Also See for GA9800:
Table of Contents

Advertisement

To activate or deactivate the Roger Beep
Press the MODe button repeatedly until 'rb' appears. Use the or buttons
to change the setting to on or oF. Press the pTT button or wait for 5 seconds to
store your choice. The Roger Beep icon will appear when Roger Beep is active.
keY Beep
If the Key Beep is activated, your radio will emit a confirmation tone with every
key press (excluding the pTT).
To activate or deactivate the key Beep
Press the MODe button repeatedly until 'bP' appears. Use the or buttons
to change the setting to on or oF. Press the pTT button or wait for 5 seconds
to store your choice. The Key Beep icon will appear when Key Beep is active.
ROOM MONITOR
The Room Monitor is similar to Hands Free (VOX) mode, except that it ignores
short, brief noises and uses only the highest microphone sensitivity level. When
Room Monitor mode is activated, the radio will transmit for 15 seconds when it
detects a continuous noise for 5 seconds or more. If the noise persists the radio
will continue to transmit for another 15 seconds.
To activate the Room Monitor mode
Press the MODe button repeatedly until 'bb' appears. Use the or buttons
to change the setting to on or oF. Press the pTT button or wait for 5 seconds to
store your choice. The Room Monitor icon will appear when the Room Monitor
is active.
Note: The Squelch must be closed for the room monitor to operate correctly.
IMPORTANT: The Room Monitor function is not a replacement for regularly
checking the safety and security of children. If you move out of communication
range you will not hear transmissions.
PAGE 1 2
INSTRUCT ION MA NUA L
T X 650

Advertisement

Table of Contents
loading

Table of Contents