GME GA9800 Instruction Manual page 377

To set the 'Squelch' mode
1. P ress the MODE key FIVE (5) times to select the Squelch setting
' will be displayed.
mode, '
2. Press the or keys to select the Squelch level from 01 (lowest) to
03 (highest) setting.
3. P ress the MODE or PTT key momentarily to confirm and store your
Squelch mode selection.
6. ROgER BEEP TONE SELECTION
The Roger Beep is a tone which is automatically transmitted whenever
the switch is released. This tone alerts the receiving party that your
PTT
transmission has ended.
To enable or disable the Roger Beep tone
From the 'Standby' mode:
1. P ress the MODE key SIX (6) times to select the Roger Beep setting
mode. 'Rb' will be displayed along with a flashing
2. Press the or keys to set the beep to 'On' or 'oF' as desired.
3. P ress the MODE or PTT key momentarily to confirm and store your
selection. If the Roger Beep function is on, the
steady on the display.
7. BUTTON BEEP TONE SELECTION
The Button Beep tone feature allows the radios to sound a confirmation
tone whenever the MON, SCAN, MODE,
To turn the Button Beep Tones On or Off
From the 'Standby' mode:
1. P ress the MODE key SEVEN (7) times to select the Button Beep
setting mode. 'bP' will be displayed along with a flashing
2. Press the or keys to set the beep to 'On' or 'oF' as desired.
3. P ress the MODE or PTT key momentarily to confirm and store your
selection. If the Button Beep function is on, the icon will remain
steady on the display and a beep will be heard in response to
key activation.
PAGE 8
.
icon will remain
or keys are pressed.
icon.
INSTRUCT IO N MA N UA L
8. CALL ALARm SELECTION
The TX670 provides 5 user selectable call alarm melodies to alert
other users to your incoming call. When enabled, the melody can be
transmitted to another user where it will be heard in the speaker of the
receiving radio.
To select your favourite call alarm melody
From the 'Standby' mode:
1. P ress the MODE key EIGHT (8) times to select the Call Alarm setting
mode. 'C' will be displayed.
2. Press the or keys to preview (listen) to the 5 available
call melodies.
3. To turn the call melodies off, select 'oF'.
4. P ress the MODE or PTT key momentarily to confirm and store
your selection.
To send the call alarm melody
Press the PTT switch twice quickly. The LED indicator will light red for
a few seconds as the melody is sent. The melody will be heard in the
speaker of the receiving radio.
T X 67 0T P