GME GA9800 Instruction Manual page 318

SQUELCH SETTINGS MENU OPTION
The sensitivity of the Squelch to incoming signals can be set to suit your operating
environment. The TX6200 has three preset squelch sensitivity settings (SQL-1, SQL-2 & SQL-3)
which can be selected in the Squelch setting menu.
SQL-1: Maximum Sensitivity.
The squelch will open even on very weak signals. This is the best setting for quiet country
or rural locations where there are few weak unwanted signals or little locally generated
interference.
SQL-2: Medium Sensitivity.
The squelch will open on most signals, but will not be as sensitive to very weak signals or local
interference. Suitable for general or suburban use.
SQL-3: Minimum Sensitivity.
The squelch will open on reasonably strong signals and weak signals will not be heard. Suitable
for inner city applications or areas of severe interference.
CTCSS SETTINGS MENU OPTION
Use the CTCSS Menu option to set the required CTCSS tone or to disable the CTCSS function.
• To enable CTCSS and set the CTCSS tone, select a number from 01 to 50 that matches
the required tone in the table provided in the CTCSS section of this manual.
• To disable CTCSS on the radio, set the CTCSS to oF.
TX6200
CTCSS is disabled
User Instructions
CTCSS is enabled
and set to tone 15
(107.2Hz)
Page 33