Signal Meter Display Menu Option - GME GA9800 Instruction Manual

SIGNAL METER DISPLAY MENU OPTION

The signal meter display is factory set to display the signal strength of the incoming signal.
However it can also be set to display other options. The following options are available.
On CB Channels 1-40:
oFF - The Signal Meter display is turned off. Nothing will be displayed in the signal meter
•
area.
bATT - The battery charge level is displayed in Volts in the Signal Meter area.
•
S-MET - Incoming signal levels are displayed in the Signal Meter area.
•
On User 'Receive Only' Channels 41-60:
• oFF - The Signal Meter Display is turned off. Nothing will be displayed in the signal
meter area.
• bATT - The battery charge level is displayed in Volts in the Signal Meter area.
• S-MET - Incoming signal levels are displayed in the Signal Meter area.
• FREQ - The 'Receive Only' channel frequency is displayed in the Signal Meter area.
Page 34
Battery Voltage Display
User Instructions
Indicates 7.9 Volts
TX6200