4. Dual Watch Settings - GME GA9800 Instruction Manual

louder voice to activate the VOX. The maximum setting will
activate the VOX with a much softer voice.
3. To disable the VOX completely, set the VOX sensitivity to
MODE
4. Press the
store your selection. When the VOX is enabled, 'VOX' is
visible on the display.

4. Dual Watch Settings

The Dual Watch mode lets you monitor two channels at the
same time. While in Dual Watch mode, the unit will monitor
both the currently selected channel and a second dual
watch channel.
To set the Dual Watch Mode
From the 'Standby' mode:
MODE
1. Press the
Watch setting mode. The 'DW' icon will flash on the display.
2. Press the
number (1 – 40). To disable the Dual Watch Mode
altogether select 'oF'.
MODE
3. Press the
and store your Dual Watch channel selection 'DW' will be
displayed at the top of the LCD and the display will now
alternate between the currently selected channel and the
Dual Watch channel.
To EXIT the Dual Watch mode, momentarily press the SCAn
key. This is equivalent to setting the 'DW' mode to '
Dual Watch Operation
• I f a signal is received on the Dual Watch channel, the radio
will pause on that channel for as long as it remains busy,
then resume the Dual Watch five (5) seconds after the last
transmission has ceased.
Page 14
PTT
or key momentarily to confirm and
key FOUR (4) times to select the Dual
or keys to select the Dual Watch channel
PTT
or key momentarily to confirm
Instruction Manual
oF.
oF
'.
TX670