Accessories Supplied; Fitting And Removing The Battery Pack - GME GA9800 Instruction Manual

COPYING FREQUENCIES BETWEEN
MEMORY BANKS . . . . . . . . . . . . . . 20
CLONING STORED MEMORIES WITH
ANOTHER UNIT . . . . . . . . . . . . . . . . 22
DCS TONE FREQUENCY CHART . . . . 23
• Scanner Receiver
• Antenna
• R echargeable Battery Pack
• Earphone

FITTING AND REMoVING ThE BATTERy pACk

Fitting
1. Ensure the receiver is switched off.
2. Align the bottom of the battery pack with the securing slots in the base of
the receiver.
3. Press the top of the battery pack into the back of the receiver until it 'clicks'.
Fitting the Battery
Removing
1. Ensure the receiver is switched off.
2. Holding the receiver in one hand, press down on the battery release catch.
3. Swing the top of the battery pack away from the receiver.
R X 1 300

ACCESSoRIES SUppLIED

IN S T RU C T IO N MA NUA L
CTCSS TONE FREQUENCY CHART . . 24
WARRANTY . . . . . . . . . . . . . . . . . . 25
SPECIFICATIONS . . . . . . . . . . . . . . . 27
• Charger Cradle
• Power Adaptor
• Lanyard Strap
Removing the Battery
PAGE 3