GME GA9800 Instruction Manual page 340

or buttons to select the desired Dual Watch channel. Press the pTT button
or wait for 5 seconds to store your choice and activate the Dual Watch.
When Dual Watch is active, the display will alternate between the primary and
Dual Watch channels and the Dual Watch icon will appear.
To deactivate Dual Watch mode
Press the SCAN button.
Pressing the pTT button while receiving a signal in Dual Watch mode will transmit
on the currently displayed channel.
Pressing the pTT button when no signal is present will transmit on the primary
channel.
Note: The MODE button will not function while the Dual Watch mode is selected.
hANDS FRee (VOX) MODe
When Hands Free (VOX) mode is selected the radio will automatically transmit
when the microphone detects your voice (or other noise). It can be used with the
internal microphone or an appropriate audio accessory.
To avoid accidental operation and reduce the effect of background noise there
are two microphone sensitivity settings ‑ High and Low.
To activate or deactivate the hands Free (VOX) mode
Press the MODe button repeatedly until 'Uo' appears. Use the or buttons to
change the sensitivity level (HI or Lo) . Press the pTT button or wait for 5 seconds
to store your choice and activate the VOX mode. The VOX icon will appear when
VOX mode is active.
Repeat this process and change the sensitivity setting to oF to deactivate the
Hands Free (VOX) mode.
ROGeR Beep
The Roger Beep is a short tone that is automatically added to the end of your
transmissions to tell other users that you have finished speaking.
TX6 5 0 IN STRUCT ION MA NUA L PAGE 11