Remote Control Functions; Battery Replacement; Auxiliary Inputs & Outputs; Front Panel Inputs - GME GA9800 Instruction Manual

auXiliarY iNpuTS & OuTpuTS
To maximise the owner's listening flexibility and pleasure
the rD95 has several auxiliary inputs and outputs.

front panel inputs

there are standard usB and sD card inputs located on the
front panel.
the are many styles and sizes of usB memory sticks and sD
cards available on the market today, however for optimum
performance GmE recommends:
• Part # USB001 GME USB Memory Stick
• Part # SDC001 GME SD Card
these devices have been specifically manufactured for GmE
and are available from your local GmE retailer.
aux input
the rD95 has a 2.5 mm stereo jack low level (1 Volt peak
to peak) audio input lines. owners may use this input for
external audio sources that they wish to control and play
through the vehicles stereo system.
GmE offers a custom interface cable for personal mP3
player connection; Part # lE68. When using this connection,
it is necessary to use the portable device functions to
control play.
rear outputs and inputs
the rD95 has Audio outputs plus Video inputs and outputs.
these inputs and outputs are clearly labelled and colour
coded, they are also identified in the wiring diagram shown
on page 5 of this manual.

rEMOTE CONTrOl

A standard accessory with the GmE rD95 is a a wireless remote
control (rcu95). the remote will permit the control of all major
rD95 functions from a distance of up to 3 metres.
Ensure plastic battery protection tab is removed from the
handset before initial operation.
simply point the remote handset at the rD95 and select
the required option on the keypad.
r D 9 5

remote control functions

mode
Power
Band/system
Enter
Program
Playing
repeat Play
random Play
tuning/
selecting
tracks/FF/
rewind
PBc menu
on-screen
Display
number
buttons
cautions
• the remote control handset is not waterproof and should be
kept well away from both fresh and salt water at all times.
• the remote control should not be left in direct sunlight
for prolonged periods, excessive sunlight and heat
could cause damage to the keypad resulting in incorrect
operation or non function.
should the working range of remote control handset
reduce, or functions fail to operate correctly. the battery
should be replaced:
1. turn remote over, insert thumb
nail\between grooves on the
battery cover latch and slide to
the right, pull out the battery tray.
2. replace the battery,
(type cr 2025 or
equivalent), with the
positive side facing upwards.
3. slide the battery tray back into the handset.
i n s t r u c t i o n m A n u A l
MODE
BND
SYS
ENTER
Eject
ANGLE
ST
AMS
RPT PROG
LOC
SEEK-
RDM
PBC OSD
1 2
5 6
9 0

BaTTErY rEplaCEMENT

Pause/Play
mute
menu Display
TITLE SUB-T
subtitle
SET-UP
set-up
Angle
SLOW
slow-motion
Play
VOL+
ZOOM
Zoom
SEEK+
SEL
Volume
sound
VOL- AUDIO
characteristics
3 4
Audio
7 8
Go to
10+
GOTO
Button
R C U 9 5
PA G E 9