5. Button Beep Tone Settings - GME GA9800 Instruction Manual

2 . Press the or
sensitivity from 1 (minimum) to 7
(maximum). The minimum setting requires
a louder voice to activate the VOX . The
maximum setting will activate the VOX
with a much softer voice .
3. T o disable the VOX completely, set the VOX
of.
sensitivity to
4 . Press and hold the
pTT
the key momentarily) to confirm and
store your selection . When the 'VOX' is
enabled, 'VOX' is visible on the display.
4. dUAL WATCH SeTTINgS
The Dual Watch mode lets you to monitor
two channels at the same time . While in dual
watch mode, the unit will monitor both the
currently selected channel and a second dual
watch channel .
To set the dual Watch Mode
From the Standby mode:
MOde
1 . Press the
the Dual Watch setting mode . The
will flash on the display .
2 . Press the or
Dual Watch channel number (1 – 40). To
disable the Dual Watch Mode altogether
of
select .
3 . Press and hold the
pTT
the key momentarily) to confirm and
store your Dual Watch channel selection .
will be displayed at the top of the LCD
and the display will now alternate between
the currently selected channel and the dual
watch channel .
To EXIT the Dual Watch mode, turn the radio
off, or momentarily press the SCAN key . This
is equivalent to setting the DW mode to
TX680
keys to select the
MOde
key (or press
key FOUR times to select
keys to select the
MOde
key (or press
INSTRUCTION MANUAL
dual Watch Operation
• I f a signal is received on the Dual Watch
channel, the radio will pause on that
channel for as long as it remains busy,
then resume the Dual Watch 5 seconds
after the last transmission has ceased .
• I f you wish to talk on the busy channel,
press the
locked onto that channel then talk in the
usual way .
• I f you wish to talk on the selected
channel, press the
signals are being received. The radio will
switch to the selected channel .

5. BUTTON Beep TONe SeTTINgS

The Button beep tone feature allows the
Radio to sound a confirmation tone whenever
SQL
the ,
keys are pressed .
To turn the Button Beeps Tones
On or Off
icon
From the Standby mode:
1 . Press the
the Button Beep setting mode. 'bP' will be
displayed along with a flashing
2 . Press the
On
or
3 . Press and hold the
the PTT key momentarily) to confirm and
store your selection . If the Button Beep
function is on, the
steady on the display and a beep will be
heard in response to key activations .
of
.
pTT
switch while the radio is
pTT
switch while no
SCAN MOde
, , ,
MOde
key FIVE times to select
or keys to set the beep to
of
as desired .
MOde
icon will remain
dUp
or
icon .
key (or press
Page 11