Mazda RX-8 Workshop Manual page 1255

< Previous Next >
2011 - RX-8 - Engine
SECONDARY SHUTTER VALVE (SSV) SWITCH INSPECTION [13B-MSP]
NOTE:
Before performing the following inspection, make sure to follow the troubleshooting
flowchart. (See
Continuity Inspection
1. Verify that the continuity between SSV switch terminals A and B is as indicated in the table.
If there is no malfunction, perform the "Circuit Open/Short Inspection".
If there is any malfunction, replace the SSV switch. (See
VALVE (SSV) SWITCH REMOVAL/INSTALLATION
Measurement condition
Push the rod
Except above
FOREWORD [13B-MSP].)
Continuity
No continuity
Continuity detected
SECONDARY SHUTTER
[13B-MSP].)