< Previous Next >
2011 - RX-8 - Engine
CHARCOAL CANISTER INSPECTION [13B-MSP]
1. Remove the charcoal canister. (See
REMOVAL/INSTALLATION
2. Plug ports A and C, then blow air into port B.
CAUTION:
Do not apply the pressure more than 20 kPa {0.2 kgf/cm
charcoal canister. Doing so will damage the charcoal canister.
3. Verify that there is no air leakage from the case.
If not as specified, replace the charcoal canister. (See
(EVAP) CONTROL SYSTEM REMOVAL/INSTALLATION
< Previous Next >
EVAPORATIVE EMISSION (EVAP) CONTROL SYSTEM
[13B-MSP].)
© 2011 Mazda North American Operations, U.S.A.
2
, 2.8 psi} to the
EVAPORATIVE EMISSION
[13B-MSP].)
Back to Top