Mazda RX-8 Workshop Manual page 1107

< Previous Next >
2011 - RX-8 - Engine
GENERATOR REMOVAL/INSTALLATION [13B-MSP]
WARNING:
Remove and install all parts when the engine is cold, otherwise they can cause severe
burns or serious injury.
When the battery cables are connected, touching the vehicle body with generator terminal
B will generate sparks. This can cause personal injury, fire, and damage to the electrical
components. Always disconnect the negative battery cable before performing the following
operation.
1. Remove the engine cover. (See
2. Remove the battery cover. (See
3. Disconnect the negative battery cable. (See
4. Remove the front suspension tower bar. (See
REMOVAL/INSTALLATION
REMOVAL/INSTALLATION
5. Remove the air hose (air cleaner to throttle body). (See
REMOVAL/INSTALLATION
6. Position the drive belt out of the way. (See
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
ENGINE COVER REMOVAL/INSTALLATION
BATTERY REMOVAL/INSTALLATION
BATTERY REMOVAL/INSTALLATION
[MT].) (See FRONT SUSPENSION TOWER BAR
[AT].)
[13B-MSP].)
DRIVE BELT REPLACEMENT
FRONT SUSPENSION TOWER BAR
INTAKE-AIR SYSTEM
[13B-MSP].)
[13B-MSP].)
[13B-MSP].)
[13B-MSP].)