Add - Motorola DSP56000 Manual

ADD

Operation:
S+D D (parallel move
Description: Add the source operand S to the destination operand D and store the
result in the destination accumulator. Words (24 bits), long words (48 bits), and accumu-
lators (56 bits) may be added to the destination accumulator.
Note: The carry bit is set correctly using word or long-word source operands if the ex-
tension register of the destination accumulator (A2 or B2) is the sign extension of bit 47
of the destination accumulator (A or B). Thus, the carry bit is always set correctly using
accumulator source operands, but can be set incorrectly if A1, B1, A10, or B10 are used
as source operands and A2 and B2 are not replicas of bit 47.
Example:
:
ADD X0,A A,X1
:
Before Execution
X0
A
$00:000100:000000
Explanation of Example: Prior to execution, the 24-bit X0 register contains the value
$FFFFFF and the 56-bit A accumulator contains the value $00:000100:000000. The
ADD instruction automatically appends the 24-bit value in the X0 register with 24 LS
zeros, sign extends the resulting 48-bit long word to 56 bits, and adds the result to the
56-bit A accumulator. Thus, 24-bit operands are added to the MSP portion of A or B (A1
or B1) because all arithmetic instructions assume a fractional, twos complement data
representation. Note that 24-bit operands can be added to the LSP portion of A or B (A0
or B0) by loading the 24-bit operand into X0 or Y0, forming a 48-bit word by loading X1 or
Y1 with the sign extension of X0 or Y0 and executing an ADD X,A or ADD Y,A instruc-
tion.
A - 26
INSTRUCTION DESCRIPTIONS
Add
A,Y:(R1)+l ;24-bit add, set up X1, save prev. result
$FFFFFF
INSTRUCTION SET DETAILS
Assembler Syntax:
ADD S,D (parallel move)
After Execution
X0
$FFFFFF
A
$00:0000FF:000000
ADD
MOTOROLA