Illegal - Motorola DSP56000 Manual

24-bit digital signal processor
Hide thumbs Also See for DSP56000:
Table of Contents

Advertisement

ILLEGAL

Operation:
Begin Illegal Instruction
exception processing
Description: The ILLEGAL instruction is executed as if it were a NOP instruction. Nor-
mal instruction execution is suspended and illegal instruction exception processing is ini-
tiated. The interrupt vector address is located at address P:$3E. The interrupt priority
level (I1, I0) is set to 3 in the status register if a long interrupt service routine is used. The
purpose of the ILLEGAL instruction is to force the DSP into an illegal instruction excep-
tion for test purposes. If a fast interrupt is used with the ILLEGAL instruction, an infinite
loop will be formed (an illegal instruction interrupt normally returns to the illegal instruc-
tion) which can only be broken by a hardware reset. Therefore, only long interrupts
should be used. Exiting an illegal instruction is a fatal error. The long exception routine
should indicate this condition and cause the system to be restarted.
If the ILLEGAL instruction is in a DO loop at LA and the instruction at LA–1 is being inter-
rupted, then LC will be decremented twice due to the same mechanism that causes LC
to be decremented twice if JSR, REP, etc. are located at LA. This is why JSR, REP, etc.
at LA are restricted. Clearly restrictions cannot be imposed on illegal instructions.
Since REP is uninterruptable, repeating an ILLEGAL instruction results in the interrupt
not being initiated until after completion of the REP. After servicing the interrupt, program
control will return to the address of the second word following the ILLEGAL instruction.
Of course, the ILLEGAL interrupt service routine should abort further processing, and the
processor should be reinitialized.
Example:
:
ILLEGAL
:
Explanation of Example: The ILLEGAL instruction suspends normal instruction execu-
tion and initiates ILLEGAL exception processing.
A - 102
INSTRUCTION DESCRIPTIONS
Illegal Instruction Interrupt
Assembler Syntax:
;begin ILLEGAL exception processing
INSTRUCTION SET DETAILS
ILLEGAL
ILLEGAL
MOTOROLA

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsp56k

Table of Contents